PCIe x8 4-port RJ45 10GBASE-T Ethernet Network Card with Intel XL710 Chip
$630.00
- Product Code: PX8-10G-4T-710
- Availability: In Stock
PX8-10G-4T-710 is a PCIe x8 10Gbps Quad Port Ethernet Copper Network Card based on Intel XL710 chipset. It is compatible with x16 lanes. The sever adapter is compatible with the existing network infrastructure and it will conveniently migrate the existing 100Mb/s and 1GbE networks to 10GbE. It can also link auto-negotiation among the rate of 100Mbps, 1GbE and 10GbE, which meets the most customers’ demanding of smooth transition and ease of migration to 10GbE. The performance is optimized so that system I/O is not the bottleneck in high-performance networking applications. In addition to managing MAC and PHY Ethernet layer functions, the controller manages PCI Express packet traffic across its transaction, link, and physical/logical layers. Using hardware acceleration, the controller offloads tasks from the host, such as TCP/UDP/IP checksum calculations and TCP segmentation.
The server adapter has four ports, of each can fully work independently, supporting four different practical application networks while working and decrease the number of slots on the equipment. The adapter has good compatibility. The four ports of the adapter can be grouped together through their own ports or other Ethernet adapter ports. It can provide multiple functions like widening access bandwidth and bandwidth access redundancy to achieve a non-stop access to the network.
The network card uses a simple, universal 10GbE access interface that can be set at any place of a data center conveniently. PX8-10G-4T-710 support the data transmission distance of 100 meters and plunk for Network structures such as Top of Rack(ToR), Middle of Row(MoR),End of Row(EoR) and etc..Intel Ethernet 700 series network adapter help the server to provide wide interoperability, optimized key performances and flexible IT network solutions among telecommunications, cloud computing and enterprises.
The server adapter has four ports, of each can fully work independently, supporting four different practical application networks while working and decrease the number of slots on the equipment. The adapter has good compatibility. The four ports of the adapter can be grouped together through their own ports or other Ethernet adapter ports. It can provide multiple functions like widening access bandwidth and bandwidth access redundancy to achieve a non-stop access to the network.
The network card uses a simple, universal 10GbE access interface that can be set at any place of a data center conveniently. PX8-10G-4T-710 support the data transmission distance of 100 meters and plunk for Network structures such as Top of Rack(ToR), Middle of Row(MoR),End of Row(EoR) and etc..Intel Ethernet 700 series network adapter help the server to provide wide interoperability, optimized key performances and flexible IT network solutions among telecommunications, cloud computing and enterprises.
Features
- Support for jumbo frame up to 9.5KB
- Priority Flow Control (draft IEEE 802.1Qbb)
- Enhanced Transmission Selection (draft IEEE802.1az)
- Statistics management and RMON
- Flow control support
- 802.1q VLAN support
- DCB/DCB-X support
- Message Signal interrupts (MSI-X)
- Storage - Enabling competitive performance with native OS drivers intelligent off- load for NFS, SMBus and iSCSI
- Network Virtualization offloads for VXLAN, NVGRE, Geneve, MPLS and Network Service Headers (NSH)
- Unified Networking Providing a single wire for LAN and storage: NAS (SMB, NFS) and SAN (iSCSI)
- Virtual Bridging Support – VEPA/802.1Qbg
- Physical Functions – Up to 8 per port, up to 32 per device
- Support for 256 Virtual Device Queues (VMDq) per port
- Virtualization - Alleviating hypervisor I/O bottlenecks by providing flow separation for Virtual Machines (VMs)
- Controller: Intel XL710
- Bus Type: PCI Express v3.0 (8.0 GT/s) x8, compatible with x16 slot
- Connector: 4 * RJ45 Copper
- Data Rate: 100Mbps/1000Mbps/10Gbps
- Cabling Distances
- 10GBASE-T: 100 m on Cat 6A, 55 m on Cat 6
- 1000BASE-T: 100 m on Cat 5e, Cat 6 or Cat 6A
- 100BASE-T: 100 m on Cat 5e, Cat 6 or Cat 6A
- Network Topology
- IEEE 802.3 an 10GBASE-T, IEEE 802.3ab 1000BASE-T, IEEE 802.3u 100BASE-T
- IEEE 802.1Q VLAN, IEEE 802.1ad, IEEE 1588, IEEE 802.1as
- Virtualization: VXLAN, NVGRE, GENEVE, VXLAN-GPE+NSH, MPLS
- Physical Interfaces: IEEE802.3: 10GBASE-SR4 and -LR4
- Additional Features
- VLAN Support
- Enhanced Transmission Selection (draft IEEE 802.1az)
- Jumbo Frame Support—Up to 9.5 KB (9728 Bytes)
- Priority Flow Control (draft IEEE 802.1Qbb)
- Data Center Bridging (DCB/DCB-X) Support; up to 8 traffic classes
- LED Indicators
- 10Gbps: Green (always on / flashing)
- 1000Mbps: Yellow + green(normally lit / flashing)
- 100Mbps: Green / Flashing
- Operating Systems
- Server 2003 / Server 2008 / Vista / Win 7 / Win 8 / Win 10 32-64bit
- Windows Server 2003 / 2008 / 2008 R2 / 2012 / 2012 R2 /2016 R2
- FreeBSD, Linux Stable Kernel, VMware ESX/ESXi
- 1 * PCIe Quad 10GbE RJ45 Server NIC XL710
- 1 * User Manual
- 1 * Driver CD
- 1 * Low Profile Bracket
| SPECIFICATIONS | |
| Chipset | Intel XL710 |
| Bus Connector | PCIe 3.0 x8 |
| Ports | 4 * RJ45 |
| Max Data Rate | 10Gbps |
| Networking Protocol | IEEE 802.1Q VLAN, IEEE 802.1ad, IEEE 1588, IEEE 802.1as |
| Cabling Type | IEEE 802.3 an 10GBASE-T, IEEE 802.3ab 1000BASE-T, IEEE 802.3u 100BASE-T |
| OS Compatibility | Server 2003 / Server 2008 / Vista / Win 7 / Win 8 / Win 10 32-64bit, Windows Server 2003 / 2008 / 2008 R2 / 2012 / 2012 R2 /2016 R2, FreeBSD, Linux Stable Kernel, VMware ESX/ESXi |