The XR17V352 (V352) is a single chip 2-channel PCI Express (PCIe) UART (Universal Asynchronous Receiver and Transmitter), optimized for higher performance and lower power. The V352 serves as a single lane PCIe bridge to 2 indepedent enhanced 16550 compatible UARTs. The V352 is compliant to PCIe 2.0 Gen 1 (2.5GT/s).
In addition to the UART channels, the V352 has 16 multi-purpose I/Os (MPIOs), a 16-bit general purpose counter/timer and a global interrupt status register to optimize interrupt servicing.
Each UART of the V352 has many enhanced features such as the 256-bytes TX and RX FIFOs, programmable Fractional Baud Rate Generator, Automatic Hardware or Software Flow Control, Auto RS-485 Half-Duplex Direction Control, programmable TX and RX FIFO Trigger Levels, TX and RX FIFO Level Counters, infrared mode, and data rates up to 25Mbps.
Features
- Single 3.3V power supply
- Internal buck regulator for 1.2V core
- PCIe 2.0 Gen 1 compliant
- x1 Link, dual simplex, 2.5Gbps in each direction
- Expansion bus interface
- EEPROM interface for configuration
- Data read/write burst operation
- Global interrupt status register for all four UARTs
- Up to 25 Mbps serial data rate
- 16 multi-purpose inputs/outputs (MPIOs)
- 16-bit general purpose timer/counter
- Sleep mode with wake-up Indicator
- Two independent UART channels controlled with
- 16550 compatible register Set
- 256-byte TX and RX FIFOs
- Programmable TX and RX Trigger Levels
- TX/RX FIFO Level Counters
- Fractional baud rate generator
- Automatic RTS/CTS or DTR/DSR hardware flow control with programmable hysteresis
- Automatic Xon/Xoff software flow control
- RS-485 half duplex direction control output with programmable turn-around delay
- Multi-drop with Auto Address Detection
- Infrared (IrDA 1.1) data encoder/decoder
Specifications
- Hardware
- Communication controller: 16C550 UART Compatible register Set
- Bus: PCIe 2.0 Gen 1 compliant , X1 Link, dual simplex, 2.5Gbps in each direction
- Connector: DB44 Female
- Serial Interface
- Number of ports: 2 ports
- Serial Standard: RS-422 (Point to Point mode), RS-485 (2 Wire RS-485 mode), 4 Wire RS-485 (Multi-Drop RS-422 mode)
- IRQ and I/O Address: Assigned by System
- Serial Line Protection
- ESD Protection: 15KV ESD Protection for all signals
- Surge Protection: 600W Surge Protection for RS-422/485 signals
- Performance
- Baud rate: up to 921.6 Kbps
- FIFOs: 256 byte
- Serial Communication Parameters
- Data Bits: 5, 6, 7, 8
- Stop Bits: 1, 1.5, 2
- Parity: None, Even, Odd, Space, Mark
- Serial Signals
- RS-422: TxD+, TxD- RxD+, RxD-, GND
- 2 Wire RS-485: Data+, Data-, GND
- 4 Wire RS-485: TxD+, TxD-, RxD+, RxD-, GND
- System Requirements
- Windows Server 2003, 2008, 2012, Windows XP, Vista, Win 7, Win 8
- Linux 2.6.27, 2.6.31, 2.6.32, 3.x.x and newer
- PCI Express-enabled system with an available PCI Express slot
- Physical Characteristics
- Bracket: Standard and Low Profile Bracket
- Bracket Space: 1
- Operating Temperature:-40 ~ 85°C
Package Contents
- 1 x PCIE 17V352 RS485/422 Serial Card (1 to 2 Port Cable Included)
- 1 x Driver CD
- 1 x User Manual
- 1 x Low Profile Bracket